Please use this identifier to cite or link to this item: http://hdl.handle.net/1843/39640
Type: Dissertação
Title: Avaliação do desempenho de ferramentas de metal duro e cermet no torneamento do aço ABNT 1045
Authors: Guilherme Souza Aleixo
First Advisor: Paulo Eustáquio de Faria
First Referee: Alexandre Mendes Abrão
Second Referee: Marcelo Araújo Câmara
Third Referee: Frederico de Castro Magalhães
Abstract: A usinagem por torneamento é uma das operações mais utilizadas na indústria metalmecânica, garantindo elevados padrões de acabamento e tolerâncias apertadas. Neste sentido, a máquina-ferramenta, os parâmetros de corte assim como a ferramenta utilizada, são elementos chave para obtenção de padrões ótimos de produção. O objetivo desta dissertação é estudar o efeito da variação dos parâmetros de entrada com a velocidade de corte (200, 250 e 300 m/min), o avanço (0,1 e 0,2 mm/rev), o material da ferramenta de corte (metal duro e cermet) e a geometria do quebra-cavaco, sobre os parâmetros de saída (rugosidade, forma do cavaco, grau de recalque e desgaste da ferramenta) na operação de torneamento a seco do aço ABNT 1045. Os resultados demonstraram que, em relação à rugosidade, o avanço mostrou-se como o único parâmetro influente na análise estatística. Percebe-se, porém, que a geometria do quebra-cavaco também apresentou influência, pois o comportamento da rugosidade para as ferramentas com quebra-cavaco para acabamento (FP) foram similares. No que se refere à forma dos cavacos, as análises revelaram que o nível mais elevado de avanço gerou cavacos com as maiores espessuras e que o material da ferramenta se mostrou influente sobre a forma do cavaco. O grau de recalque diminuiu em função do aumento da velocidade de corte e avanço. Finalmente, podese observar que o mecanismo de desgaste predominante foi adesão e a ferramenta que apresentou melhor desempenho foi a de metal duro com quebra cavaco FP.
Abstract: The turning machining is one of the most used operations in the metal-mechanical industry, ensuring high standard patterns of finish and tight margin of tolerability. In this sense, a machine tool, the cutting parameters, as well as the tool used, are key elements for the application of optimal production standards. The aim of this dissertation is to study the effect of the variation of the input parameters cutting speed (200, 250 e 300 m/min), feed (0,1 e 0,2 mm/rev), tool material (carbide and cermet) and chip break geometry on the output parameters (machined surface roughness, chip shape, chip thickness ratio and tool wear) in dry turning of AISI 1045 steel. The results indicated that as far as the surface roughness is concerned, feed is the only significant factor, however, chip breaker geometry also has influence, since the roughness behavior for the finishing chip breaker (FP) was similar. Regarding chip shape, the highest level of feed generated chips with the highest thickness and that the tool material was influential on the chip shape. The chip thickness ratio decreased as the cutting speed and feed increased. Finally, it can be seen that the predominant wear mechanism was adhesion and the tool with the best performance was the cemented carbide with FP chip breaker. It was not possible to establish a relationship between roughness maximum flank wear.
Subject: Engenharia de produção
Aspereza de superfície
Desgaste mecânico
Usinagem
language: por
metadata.dc.publisher.country: Brasil
Publisher: Universidade Federal de Minas Gerais
Publisher Initials: UFMG
metadata.dc.publisher.department: ENG - DEPARTAMENTO DE ENGENHARIA PRODUÇÃO
metadata.dc.publisher.program: Programa de Pós-Graduação em Engenharia de Produção
Rights: Acesso Aberto
URI: http://hdl.handle.net/1843/39640
Issue Date: 29-Oct-2020
Appears in Collections:Dissertações de Mestrado

Files in This Item:
File Description SizeFormat 
versão final.pdf4.04 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.