Please use this identifier to cite or link to this item:
http://hdl.handle.net/1843/57010
Type: | Artigo de Periódico |
Title: | Estudo sobre a integridade superficial do aço ABNT 4140 após a operação de torneamento |
Other Titles: | Study on the surface integrity of AISI 4140 steel after turning |
Authors: | Augusto Moura Martins Poliana Santos Souza Anderson Júnior Dos Santos Alexandre Mendes Abrão Berend Denkena Kolja Meyer |
Abstract: | Os componentes de equipamentos estão muitas vezes sujeitos a esforços cíclicos, os quais são capazes de provocar falhas, mesmo apenas quando deformações elásticas estão envolvidas. Os processos de fabricação são capazes de afetar a rugosidade e induzir tensões residuais de diferentes intensidades e profundidades, podendo influenciar o desempenho e a vida em serviço de peças manufaturadas. Neste trabalho, foi avaliada a influência dos parâmetros de torneamento (velocidade de corte, avanço e profundidade de usinagem) sobre a rugosidade, tensões residuais e vida em fadiga do aço ABNT 4140 temperado e revenido (40 HRC). A maior influência sobre a rugosidade foi devido à variação do avanço, que gerou maiores rugosidades para valores mais altos de avanço. Observou-se também que os parâmetros de usinagem foram capazes de alterar o perfil das tensões residuais, induzindo tensões de tração e de maior intensidade à medida que a velocidade de corte foi elevada e de tração em profundidades maiores para a combinação de avanço mais elevado e profundidade de usinagem mais baixa. A vida em fadiga do material foi avaliada por meio do teste por flexão rotativa, o qual acusou influência combinada do avanço com a profundidade de usinagem. Para menores avanços, o aumento da profundidade prolongou a vida em fadiga, já para avanços mais elevados o comportamento foi oposto. A vida em fadiga mais longa foi observada após o torneamento sob velocidade de corte e profundidade de usinagem elevadas e aliadas ao menor avanço. |
Abstract: | Machine components are usually subjected to cyclic loads, which may lead to failure, even when the component is subjected to elastic deformations only. Manufacturing processes are capable of affecting roughness and inducing residual stresses of distinct levels and depths, being able to affect the component performance and lifespan. This work investigates the influence of turning parameters (cutting speed, feed and depth of cut) on surface roughness, residual stress and fatigue life of hardened AISI 4140 steel (40 HRC). Feed is the most influential parameter affecting surface roughness. It was noticed that the cutting parameters did affect the residual stress profile, i.e., tensile residual stresses of higher intensity were induced when higher cutting speeds were employed and reaching deeper layers when higher feed and lower depth of cut values were used. The fatigue life was evaluated under rotating bending tests, which indicated a combined influence of feed and depth of cut. At lower feeds, the increase of depth of cut resulted in longer lives, however, an opposite behavior was noted at higher feeds. Longer fatigue lives were observed after turning at higher cutting speeds and depths of cut combined with lower feeds. |
Subject: | Aspereza da superfície Fadiga Engenharia mecânica |
language: | por |
metadata.dc.publisher.country: | Brasil |
Publisher: | Universidade Federal de Minas Gerais |
Publisher Initials: | UFMG |
metadata.dc.publisher.department: | ENG - DEPARTAMENTO DE ENGENHARIA MECÂNICA ENGENHARIA - ESCOLA DE ENGENHARIA |
Rights: | Acesso Aberto |
metadata.dc.identifier.doi: | https://doi.org/10.1590/S1517-707620200002.1027 |
URI: | http://hdl.handle.net/1843/57010 |
Issue Date: | 2020 |
metadata.dc.url.externa: | https://www.scielo.br/j/rmat/a/MBdmy4VZ6sBzf4nBpnhxXHB/?lang=pt |
metadata.dc.relation.ispartof: | Matéria (Rio de Janeiro) |
Appears in Collections: | Artigo de Periódico |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Estudo sobre a integridade superficial do aço ABNT 4140 após a operação de torneamento.pdf | 487.17 kB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.