Please use this identifier to cite or link to this item:
http://hdl.handle.net/1843/66848
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.creator | Gabriel Mendes de Almeida Carvalho | pt_BR |
dc.creator | Alexandre Queiroz Bracarense | pt_BR |
dc.creator | Ariel Rodriguez Arias | pt_BR |
dc.creator | Varney da Silva Medeiros Junior | pt_BR |
dc.date.accessioned | 2024-04-04T15:11:17Z | - |
dc.date.available | 2024-04-04T15:11:17Z | - |
dc.date.issued | 2022 | - |
dc.citation.volume | 27 | pt_BR |
dc.identifier.doi | https://doi.org/10.1590/0104-9224/SI27.18 | pt_BR |
dc.identifier.issn | 1980-6973 | pt_BR |
dc.identifier.uri | http://hdl.handle.net/1843/66848 | - |
dc.description.abstract | The study of fatigue in an underwater environment is difficult because it involves several variables, many of them are related to the interaction of the material with the environment in which it is submitted. In fatigue tests in an aqueous environment, the appearance of bubbles that detach from the crack tip region during the test was observed, however, until now the literature had not reported this phenomenon. Seeking repeatability, this work presents test parameters that promote the detachment of bubbles, facilitating their study and understanding. Type C(T) specimens made of ASTM A36 steel were tested in an underwater environment under a constant load variation (ΔP) of 5kN and frequency of 30Hz. The detachments of the bubbles during the tests were recorded with a high-speed camera (capture of 1000fps). The results indicate that the first bubbles released during the test are smaller and increase in volume with increasing crack length, reaching a maximum average diameter and after that, there is a decrease and suppression of the phenomenon when approaching the end of the test. The occurrence was associated with hydrogen embrittlement, with proven existence in this type of test. | pt_BR |
dc.description.resumo | O estudo da fadiga em ambiente subaquático é dificultado pois envolve diversas variáveis, muitas delas estão relacionadas à interação do material com o meio em que está submetido. Em testes de fadiga em ambiente aquoso foi constatado o aparecimento de bolhas que se desprendem da região da ponta da trinca durante o ensaio, porém, até o momento a literatura não havia relatado esse fenômeno. Buscando a repetibilidade, este trabalho apresenta parâmetros de ensaio que promovam o desprendimento de bolhas, facilitando seu estudo e compreensão. Corpos de prova do tipo C(T) fabricados em aço ASTM A36 foram ensaiados em ambiente subaquático sob uma variação de carga constante (ΔP) de 5kN e frequência de 30Hz. Os desprendimentos das bolhas durante os ensaios foram registrados com uma câmera de alta velocidade (captura de 1000fps). Os resultados indicam que as primeiras bolhas desprendidas durante o ensaio são menores e aumentam de volume com o aumento do comprimento da trinca, chegando a um diâmetro médio máximo e após isso ocorre diminuição e supressão do fenômeno ao se aproximar do final do ensaio. A ocorrência foi associada à fragilização por hidrogênio, com existência já comprovada nesse tipo de ensaio. | pt_BR |
dc.description.sponsorship | CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior | pt_BR |
dc.format.mimetype | pt_BR | |
dc.language | por | pt_BR |
dc.publisher | Universidade Federal de Minas Gerais | pt_BR |
dc.publisher.country | Brasil | pt_BR |
dc.publisher.department | ENG - DEPARTAMENTO DE ENGENHARIA MECÂNICA | pt_BR |
dc.publisher.initials | UFMG | pt_BR |
dc.relation.ispartof | Soldagem & inspeção | pt_BR |
dc.rights | Acesso Aberto | pt_BR |
dc.subject | Fadiga subaquática | pt_BR |
dc.subject | Propagação de trinca | pt_BR |
dc.subject | Desprendimento de bolhas | pt_BR |
dc.subject.other | Materiais - fadiga - testes | pt_BR |
dc.subject.other | Soldagem subaquática | pt_BR |
dc.subject.other | Engenharia mecânica | pt_BR |
dc.title | Análise de bolhas desprendidas durante o ensaio por fadiga realizado em ambiente subaquático | pt_BR |
dc.title.alternative | Analysis of bubbles released during fatigue testing in underwater environment | pt_BR |
dc.type | Artigo de Periódico | pt_BR |
dc.url.externa | https://www.scielo.br/j/si/a/s3k5dvLcVtwJ6nnbxCqRtnS/# | pt_BR |
dc.identifier.orcid | https://orcid.org/0000-0002-2809-6003 | pt_BR |
dc.identifier.orcid | http://orcid.org/0000-0001-7326-497X | pt_BR |
dc.identifier.orcid | https://orcid.org/0000-0002-6213-0076 | pt_BR |
dc.identifier.orcid | http://orcid.org/0000-0002-9995-4589 | pt_BR |
Appears in Collections: | Artigo de Periódico |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Análise de bolhas desprendidas durante o ensaio por fadiga realizado em ambiente subaquático.pdf | 698.41 kB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.