Please use this identifier to cite or link to this item: http://hdl.handle.net/1843/70486
Type: Artigo de Periódico
Title: Effect of different resin cements on the bond strength of custom-made reinforced glass fiber posts — a push-out study
Authors: Patrícia M. C. Soares
Luis F. S. A. Morgan
Stéphanie Quadros Tonelli
Francisco I. R. Limeira
Fábio F. B. Bruzinga
Paulo Isaias Seraidarian
Rodrigo de Castro Albuquerque
Frank F. Silveira
Abstract: Aim and objective: This study aims to evaluate the effect of different resin cements on the bond strength (BS) of custom-made glass fiber posts (GFPs) using the push-out test. Materials and methods: Twenty-four uniradicular bovine teeth were selected. The crowns were sectioned at the cementoenamel junction, and the root canals were treated. The post spaces of the teeth were prepared to a length of 12 mm to receive a GFP. The specimens were randomly assigned to three experimental groups (n = 8), according to the resin cement used to fix the GFPs: RelyX U200 (U200), Allcem Core (ACC), and Allcem Dual (ACD). Each specimen was sectioned into six slices per root third (cervical, middle, and apical), which were subjected to the push-out test. BS values were calculated and compared using the Kruskal–Wallis and Friedman tests. Results: There were significant differences in the middle third, according to the resin cement type used (p < 0.05). ACD showed lower BS values (p < 0.05). Significant differences were observed for ACD among the thirds of the slices, with the lowest values also observed for the middle third (p < 0.05). Conclusion: The present study shows that ACC and U200 showed higher BS values compared with ACD, and were also less influenced by the depth of the root dentin. Clinical significance: The restoration of endodontically treated teeth is a challenge in dentistry, and, in most cases, will require installation of fiberglass pins. In this respect, several types of resin cements are indicated for cementation of these pins; for this reason, their adhesiveness must be adequately investigated. Conventional cements and self-adhesive cements have shown satisfactory performance in cementing the custom-made GFPs, thereby making these cements satisfactory clinical choices. The present study suggests that ACD had lower performance than the other two cements evaluated.
Abstract: Intuito e objetivo: Este estudo tem como objetivo avaliar o efeito de diferentes cimentos resinosos na resistência de união (RU) de pinos de fibra de vidro (GFPs) customizados por meio do teste push-out. Materiais e métodos: Foram selecionados 24 dentes bovinos unirradiculares. As coroas foram seccionadas na junção amelo-cementária e os canais radiculares foram tratados. Os espaços dos pinos dos dentes foram preparados com um comprimento de 12 mm para receber um GFP. Os corpos de prova foram distribuídos aleatoriamente em três grupos experimentais (n = 8), de acordo com o cimento resinoso utilizado para fixação dos GFPs: RelyX U200 (U200), Allcem Core (ACC) e Allcem Dual (ACD). Cada espécime foi seccionado em seis fatias por terço radicular (cervical, médio e apical), que foram submetidas ao teste de push-out. Os valores de BS foram calculados e comparados pelos testes de Kruskal-Wallis e Friedman. Resultados: Houve diferenças significativas no terço médio, de acordo com o tipo de cimento resinoso utilizado (p < 0,05). ACD apresentou menores valores de BS (p < 0,05). Foram observadas diferenças significativas para ACD entre os terços dos cortes, sendo os menores valores observados também para o terço médio (p < 0,05). Conclusão: O presente estudo mostra que ACC e U200 apresentaram maiores valores de BS em comparação com ACD, e também foram menos influenciados pela profundidade da dentina radicular. Significado clínico: A restauração de dentes tratados endodonticamente é um desafio em odontologia e, na maioria dos casos, exigirá a instalação de pinos de fibra de vidro. Nesse sentido, diversos tipos de cimentos resinosos são indicados para cimentação desses pinos; por esta razão, a sua adesividade deve ser adequadamente investigada. Os cimentos convencionais e os cimentos autoadesivos têm demonstrado desempenho satisfatório na cimentação dos GFPs customizados, tornando esses cimentos escolhas clínicas satisfatórias. O presente estudo sugere que o ACD teve desempenho inferior aos outros dois cimentos avaliados.
Subject: Dente não vital
Cimentos de resina
Vidro, Fibra de.
language: eng
metadata.dc.publisher.country: Brasil
Publisher: Universidade Federal de Minas Gerais
Publisher Initials: UFMG
metadata.dc.publisher.department: FAO - DEPARTAMENTO DE ODONTOLOGIA RESTAURADORA
Rights: Acesso Aberto
metadata.dc.identifier.doi: 10.5005/jp-journals-10024-3058
URI: http://hdl.handle.net/1843/70486
Issue Date: 2021
metadata.dc.url.externa: https://www.thejcdp.com/abstractArticleContentBrowse/JCDP/19/22/3/26562/abstractArticle/Article
metadata.dc.relation.ispartof: The journal of contemporary dental practice
Appears in Collections:Artigo de Periódico



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.