Effect of intercritical annealing with high cooling rate associated with cold deformation and subcritical annealing on microstructure and mechanical properties of SAE 52100
Carregando...
Data
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Federal de Minas Gerais
Descrição
Tipo
Artigo de periódico
Título alternativo
Primeiro orientador
Membros da banca
Resumo
Conventional spheroidization heat treatments of bearing steels are long-term, therefore it is necessary to study alternatives to decrease the heat treatment time to save energy consumption. This work aimed to develop a new manufacturing route in order to obtain a completely spheroidized microstructure. The microstructure and mechanical properties of SAE 52100 steel were evaluated after intercritical annealing with higher cooling rate than the conventional one, followed by cold deformation with different area reductions, and subcritical annealings with different soaking times. It has been observed that the route considering the intercritical annealing with cooling rate 8 times higher than the conventional one, followed by a high cold reduction and subcritical annealing for 1 h turns feasible the complete spheroidization of the material.
Abstract
Assunto
Aço, Metais Deformação, Engenharia de materiais, Metalurgia
Palavras-chave
SAE 5210 steel, Subcritical annealing, Cold deformation
Citação
Departamento
Curso
Endereço externo
https://www.sciencedirect.com/science/article/pii/S2238785420313764