Analytic roughness prediction by deep rolling

B. Denkena; Alexandre Mendes Abrao; A. Krödel; Kolja Meyer

Use este identificador para citar o ir al link de este elemento: http://hdl.handle.net/1843/57014

Tipo:	Artigo de Periódico
Título:	Analytic roughness prediction by deep rolling
Autor(es):	B. Denkena Alexandre Mendes Abrao A. Krödel Kolja Meyer
Resumen:	Deep rolling is a widely applied mechanical surface and subsurface treatment method. It is typically used after conventional machining to improve the roughness, increase the surface hardness and to induce compressive residual stresses. The main influence parameters on the surface topography are the applied deep rolling pressure, the ball diameter and the feed. In general, low feeds, larger ball diameters and higher pressures result in an even surface finish. However, an exact prediction of the roughness is not possible. Therefore, it is the aim of the presented research to find a generally applicable method for surface roughness prediction after deep rolling for a variety of steel and aluminum materials. It is shown that the surface topography can be predicted by an analytical model with high accuracy.
Asunto:	Engenharia de Materiais e Metalúrgica Testes de dureza Topografia
Idioma:	eng
País:	Brasil
Editor:	Universidade Federal de Minas Gerais
Sigla da Institución:	UFMG
Departamento:	ENG - DEPARTAMENTO DE ENGENHARIA MECÂNICA ENGENHARIA - ESCOLA DE ENGENHARIA
Tipo de acceso:	Acesso Aberto
Identificador DOI:	https://doi.org/10.1007/s11740-020-00961-0
URI:	http://hdl.handle.net/1843/57014
Fecha del documento:	30-abr-2020
metadata.dc.url.externa:	https://link.springer.com/article/10.1007/s11740-020-00961-0
metadata.dc.relation.ispartof:	Production Engineering
Aparece en las colecciones:	Artigo de Periódico

archivos asociados a este elemento:

archivo	Descripción	Tamaño	Formato
Analytic roughness prediction by deep rolling.pdf		2.48 MB	Adobe PDF	Visualizar/Abrir

Mostrar registro completo del elemento Visualizar estadísticas