Adaptação marginal de copings metálicos confeccionados no sistema CAD/CAM CEREC
Carregando...
Data
Autor(es)
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Federal de Minas Gerais
Descrição
Tipo
Monografia de especialização
Título alternativo
Primeiro orientador
Membros da banca
Resumo
O presente estudo verificou a adaptação marginal entre a infraestrutura metálica para
restauração metalocerâmica e o componente protético do tipo munhão anatômico para
implante cone morse utilizando o sistema CEREC (Sirona Dental Company, Alemanha). Para
execução do presente estudo laboratorial foi confeccionada uma base de alumínio retangular
com altura de 2,5cm e largura de 2,5cm. No centro da base foi instalado um implante do
sistema cone morse com 11,0mm de comprimento e 4,0mm de diâmetro e fixado um munhão
anatômico cone morse. O modelo mestre foi scaneado pela unidade CAD/Cerec Omnicam.
Com o arquivo de imagem gerado, o coping foi desenhado no Software CEREC Premium SW
4.4.2 e exportado para o software CEREC Premium CAM SW 4.4.2 para a fresagem. Quatro
copings foram conseguidos utilizando a Fresadora MCXL e blocos VITA CAD-Waxx com
fresas Shaper 25RZ e Finisher 10 e obtidos pelo processo de cera perdida utilizando liga
metálica do sistema níquel-cromo. A verificação da adaptação cervical foi com auxílio de
microscópio comparador óptico Mitutoyo (TM 500) na interface entre a infraestrutura
metálica/componente protético nas faces mesial, vestibular, distal e lingual. Os resultados
revelaram uma desadaptação cervical média de 146,0µm, entretanto esse valor foi superior à
discrepância marginal clinicamente aceitável.
Abstract
The present study verified the marginal adaptation between the metallic infrastructure
for metal-ceramic restoration and the anatomical trunnion-type prosthetic component for cone
morse implant using the CEREC system (Sirona Dental Company, Germany). For the
execution of the present laboratory study was made a rectangular aluminum base with height
of 2.5cm and width of 2.5cm. In the center of the base was installed an implant of the cone
morse system with 11,0mm of length and 4.0mm of diameter and fixed an anatomical
trunnion cone morse. The master model was scanned by the CAD / Cerec Omnicam unit.
With the image file generated, the coping was designed in the CEREC Premium Software SW
4.4.2 and exported to the software CEREC Premium CAM SW 4.4.2 for milling. Four
copings were achieved using the MCXL Miller and VITA CAD-Waxx blocks with Shaper
25RZ and Finisher 10 cutters and obtained by the lost wax process using nickel-chromium
alloy metal. The verification of the cervical adaptation was performed using the Mitutoyo
(TM 500) optical comparator microscope at the interface between the metallic / prosthetic
component at the mesial, buccal, distal and lingual surfaces. The results showed an average
cervical inadaptation of 146.0 μm, however this value was higher than the clinically
acceptable marginal discrepancy.
Assunto
Ligas metalo-cerâmicas, Porcelana dentária, Implantação dentária, Adaptação
Palavras-chave
Ligas metalo-cerâmicas, Porcelana dentária, Sistema CAD/CAM